Checking The Remaining Time Or The Playing Position; Locking The Controls (Hold) - Sony Walkman MZ-R500DPC Operating Instructions Manual

Checking the remaining
time or the playing
position
You can check the track name, disc name,
etc. during playback.
>MENU.
1
While the recorder is playing, press
ENTER, press >MENU.
repeatedly until "DISP" flashes in the
display, and then press ENTER again.
2
Press >MENU. repeatedly
until the information you want flashes
in the display.
Each time you press MENU., the
display changes as follows.
LapTim (erapsed time)
r
1 Rem (remaining time of the
current track)
r
AllRem (remaining time after
current location)
3
Press ENTER.
The display changes as follows.
A
A
Elapsed time
ENTER
B
B
Track number
A
Remaining time of
the current track
Remaining time
after the current
location
1)
Appears only if the track has been labeled.
z
If you want to check the remaining time or the
recording position while recording or in stop
mode, see page 20.
Locking the controls
(HOLD)
To prevent the buttons from being
accidentally operated when you carry the
recorder, use this function.
1
Slide HOLD in the direction of the
..
To unlock the controls
Slide HOLD in the opposite direction of
the arrow.
B
1)
Track name
1)
Disc name
HOLD
23
-GB