Table of Contents
Advertisement
ADDENDA
I. MODEL C/PEK-3/T
The Model C/PEK-3/T consists of a Model C/PEK-3 Stereo Cartridge Analyzer
and a 240 to 120 Vac autotransformer which allows the Analyzer to be operated
from a 216 to 264 Vac, 50-60 Hz, power source.
The autotransformer is supplied with a permanently attached three-conductor
ac power (mains) cord without a connector on the "mains" end. A suitable
connector must be installed by qualified service personnel. To attach a con-
nector, connect the brown conductor of the power cord to the "live" terminal
of the connector, the blue conductor to the "neutral" terminal, and the green-
yellow conductor to the "earth" terminal.
To operate the Analyzer, plug the C/PEK-3 power cord into the power recep-
tacle provided on the autotransformer. Connect the power cord from the
autotransformer to the 240 Vac (mains) power source. The C/PEK-3 will now
operate as it would if it were directly connected to a 120 Vac power source and
120 Vac (80 watts maximum load) will be available at the switched power outlet
on the front of the unit.
II. GUARANTEE
This Shure product is guaranteed in normal use to be free from electrical and
mechanical defects for a period of one year from date of purchase. Please
retain proof of purchase date. This guarantee includes all parts and labor.
This guarantee is in lieu of any and all other guarantees or warranties,
express or implied, and there shall be no recovery for any consequential
or incidental damages.
Ill. SHIPPING INSTRUCTIONS
Carefully repack the unit and return it prepaid to:
Shu re Brothers Incorporated
Attention: Service Department
1501 West Shure Drive
Arlington Heights, Illinois 60004
If
outsidethe united States, return the unit to your dealer or Authorized Shure
Service Center for repair. The unit will be returned to you prepaid.
Advertisement
Table of Contents
