Philips 20PFL4122/93 Service Manual page 10

10
TPS 1.0A LA
Step 5. Remove Front bezel assy and LVDS cable as Fig.8~9.
a. Remove the LVDS cable as Fig.8.
b. Remove the Front bezel assy as Fig.9.
4. Mechanical Instructions
Fig.7
Insulation material
4.2 Set Re-assembly
To re-assemble the whole set, execute all processes in reverse
order.
Notes:
a. While re-assembling, make sure that all cables are placed
and connected in their original position.
b. Pay special attention not to damage the EMC foams at the
SSB shielding. Check that EMC foams are put correctly on
their places.
In warranty, it is not allowed to disassembly the LCD panel, even the
backlight unit defect.
Fig.8
Out of warranty, the replacment of backlight unit is a correct way
when the defect is cused by backlight (CCFL,Lamp).
Fig.9
Fig.10