Additional Operations - Sony DVP-S536D Operating Instructions Manual

Sony cd/dvd player dvp-s536d, dvp-s535d operating instructions

Hide thumbs

Table Of Contents

Table of Contents

Playing Discs

To turn on the player

Press ! on the player. The player enters standby mode

and the power indicator lights up in red.

Then press @/1 on the remote. The player turns on and

the power indicator lights up in green. In standby mode,

the player also turns on by pressing A on the player or by

pressing H.

To turn off the player

Press @/1 on the remote. The player enters standby mode

and the power indicator lights up in red.

To disconnect the power of the player, press ! on the

player.

Notes on playing DTS sound tracks on a CD

• Do not play DTS sound tracks without first connecting the

player to an audio component having a built-in DTS decoder.

The player outputs the DTS signal via the DIGITAL OUT

OPTICAL and COAXIAL connectors even if "DTS" in "AUDIO

SETUP" is set to "OFF" in the setup display, and may affect

your ears or cause your speakers to be damaged.

• Set the sound to "STEREO" when you play DTS sound tracks

on a CD. (See "Changing the Sound" on page 31.) If you set

the sound to "1/L" or "2/R", no sound will come from the

DIGITAL OUT OPTICAL and COAXIAL connectors.

• If you play a CD with a DTS sound track, a loud noise may

come out from the AUDIO OUT connectors, affecting your ears

or causing the speakers to be damaged.

Notes on playing DTS sound tracks on a DVD

The signals of the DTS sound tracks are output from the

DIGITAL OUT OPTICAL and COAXIAL connectors only. No

sound will be output from the AUDIO OUT connectors.

• If the player is connected to an audio component lacking a

built-in DTS decoder, do not set "DTS" in "DIGITAL OUT" to

"ON" in the setup display. Otherwise, when you play the DTS

sound track, a loud noise will come out from the speakers,

affecting your ears or causing the speakers to be damaged.

• When you set "DTS" in "AUDIO SETUP" to "OFF", no sound

will come out from the DIGITAL OUT OPTICAL and

COAXIAL connectors even if you play DTS sound tracks on

DVDs.

Notes

• If you leave the player or the remote in pause or stop mode for

15 minutes, the screen saver image appears automatically. It

will also appear if you play back a CD for more than 15

minutes. To make the screen saver image go away, press H.

(If you want to set the screen saver function to off, see page 52.)

• If you don't operate the player or the remote for more than 30

minutes when a disc is not being played, the power is

automatically turned off. (Auto Power Off function)

• While playing a disc, do not turn off the player by pressing !.

Doing so may cancel the settings of the menu. When you turn

off the player, press x first to stop playback and then press @/1

on the remote. After the power indicator lights up in red and

the player enters standby mode, press ! on the player.