Setting For Digital Cinema Sound - Sony DVP-F11 Operating Instructions Manual

Setting for Digital Cinema Sound Z
Select the mode to enjoy multichannel surround sound
such as Dolby Digital and MPEG.
Even if you connect only front speakers, Virtual Enhanced
Surround lets you enjoy 3D sound by using 3D sound
imaging to create virtual rear speakers from the sound of
the front speakers (L, R) without using actual rear
speakers.
You can feel the more effective 3D sound when you
connect a receiver (amplifier) with digital (optical or
coaxial) input, 2 front speakers, 2 rear speakers, 1 center
speaker and 1 subwoofer.
Select "VES" after pressing DISPLAY. When you select
the item except "OFF," the indicator of the "VES" lights in
green.
1 2 ( 2 7 )
1 8 ( 3 4 )
C 0 1 : 3 2 : 5 5
VES
OFF
OFF
VES A
VES B
To select, press
pVES
Select the desired item. For details on each item, see
"Effects of each item."
Default setting is underlined.
• OFF
• VES A
• VES B
PLAY
DVD
, then .
ENTER
Effects of each item
OFF
Outputs 2-channel signals for stereo sound of the CD. 5-
channel signals for Dolby Digital sound of the DVD are
mixed down to 2-channel to be output.
VES (Virtual Enhanced Surround) A
Uses 3D sound imaging to create virtual rear speakers
from the sound of the front speakers (L, R) without using
actual rear speakers. The virtual speakers are reproduced
as shown in the illustration below.
L
VES (Virtual Enhanced Surround) B
Uses 3D sound imaging to create virtual rear speakers
from the sound of the front speakers (L, R) without using
actual rear speakers. The virtual speakers are reproduced
as shown in the illustration below.
L
Notes
• You cannot select "VES" when "DOLBY DIGITAL" is set to
"DOLBY DIGITAL" in "AUDIO SETUP."
• In case that the player outputs the signal from OPTICAL and
COAXIAL , the surround effect will be heard only when you
set "MPEG" to "PCM" in "AUDIO SETUP."
• Some discs do not have rear sound. In this case, you cannot get
the 3D surround effect.
• When you select an item, the sound cuts off for a moment.
• When the playing signal does not contain the surround
component, the effects may be difficult to hear even if you
select "VES A" or "VES B."
• Set the front speakers to form an equilateral triangle including
the listening position, or the effects may be difficult to hear
even if you select "VES A" or "VES B."
• When you connect a subwoofer, you can also hear the sound
from the subwoofer.
• When you select "VES A" or "VES B," set the surround settings
of the connected units such as the amplifier to OFF.
R
R
35