Installing The Software; Installing Audio Player For Adapter To Your Clié Handheld - Sony CLIE Audio Player for Adapter Operating Instructions Manual

Installing the software

Installing Audio Player for Adapter to your CLIÉ handheld
Install the Audio Player for Adapter to your CLIÉ handheld by the
procedures below.
Note
Make sure that your CLIÉ handheld and computer can operate HotSync by attaching
your CLIÉ handheld to the cradle or the USB cable before installing the software. For
details on how to connect your CLIÉ handheld and your computer, and how to
operate HotSync, refer to the Operating Instructions of the CLIÉ handheld.
1
Insert the installation CD-ROM supplied with Audio Adapter
PEGA-SA10 into the CD-ROM drive of your computer.
The setup program starts automatically.
2
Click [Install Audio Adapter system files].
3
Install the Audio Player for Adapter following the displayed
instructions.
Select the model of your CLIÉ handheld on the model selection screen.
Notes
• If you use multiple models, install the software for each model.
• Select the model name of your CLIÉ handheld on the select user name screen.
4
Click [Finish] on the screen to complete the installation.
Audio Player for Adapter is transferred to CLIÉ (Sony PDA) Palm
Desktop software.
5
Connect your CLIÉ handheld to the computer by the cradle or
the USB cable and perform the HotSync.
Audio Player for Adapter is installed to your CLIÉ handheld.
6
Click [Exit] to complete the set-up program on the computer.
7
Perform soft-reset of your CLIÉ handheld following the
displayed instructions.
6