Adjusting The Sound Characteristics; Changing The Bbe Mp Setting; Quickly Attenuating The Sound - Sony CDX-M8800 Operating Instructions Manual

Adjusting the sound
characteristics
You can adjust the bass, treble, balance, fader,
and subwoofer volume.
1
Press (SOUND) repeatedly to select
the desired item.
Each time you press (SOUND), the item
changes as follows:
BASS (bass) t TREBLE (treble) t
BALANCE (left-right) t
FADER (front-rear) t
SUB (subwoofer volume)
2
Adjust the level of a selected item by
pressing < or ,.
After 3 seconds, the display returns to the
normal play mode.
Note
Adjust within 3 seconds after selecting the item.
Tip
When adjusting with the rotary commander, press
(SOUND) repeatedly and then rotate the VOL control.

Changing the BBE MP setting

The BBE MP process effectively adds warmth
and provides clear CD quality sound even from
heavily compressed MP3 material.
During playback on this unit, press
(5) (BBE MP) to select "BBE MP-on."
To cancel the BBE MP, select "BBE MP-off."
Note
The BBE MP function is available only when playing
back on this unit (when playing back on the optional
unit, BBE MP is not available).
Tip
You can change the BBE MP setting only when
playing back on this unit.
Quickly attenuating the
sound
(With the rotary commander or the card
remote commander)
Press (ATT).
"ATT-on" appears in the display momentarily.
To restore the previous volume level, press
(ATT) again.
Tip
When the interface cable of a car telephone is
connected to the ATT lead, the unit decreases the
volume automatically when a telephone call comes in
(Telephone ATT function).
23