AMU pH-Redox
Installation
3.15. Interfaces
3.15.1 RS232 Interface
3.15.2 Profibus (optional)
36
The RS232 interface is located on the back of the AMU transmitter.
The RS232 interface is used for logger download and firmware up-
load.
To connect several instruments by means of a network or to config-
ure a PROFIBUS DP connection, consult the PROFIBUS manual.
Use appropriate network cable.
NOTICE: The switch must be ON if only one instrument is
installed, or on the last instrument in the bus
A-96.250.441 / 060619