Bumper Cover Removal - Subaru Legacy 2015 Technicians Reference Booklet

2015 Legacy and Outback

Bumper Cover Removal

Bumper cover removal is necessary when removing the radiator. The bumper cover (front and
rear) is attached to the body with trim clips only.
Begin bumper cover removal by removing the six clips along the top side at the indicated positions.
Elevate the vehicle and remove the inner fender trim tab from each front inner wheel well. Raise
the vehicle high enough to remove the three lower bumper cover trim tabs and the three trim tabs
located in front of each tire.
New Technology Training
Upper Clips
Inner Fender Clip
Lower Clips
11
(Module 926)
1-7
1-8
1-9
June 2014