Edit Setup Mode; Global Mode - Kurzweil SP76-II Musician's Manual Addendum

Edit Setup Mode

The Zone Specific Parameters
Aux Send Level
The Aux Send Level parameter determines the send level for the auxiliary effects of the
currently selected Zone. You can select any level from 0 to 127. Pressing both Value buttons
simultaneously will set this parameter to 20.
New in the V2 OS, you can now set the Aux Send Level parameter to ‐1. A setting of ‐1 sets the
Aux Send Level to use the value originally used by the program in Program mode. This is a
convenient way to set a good Aux Send Level if you are unsure of what level to set.
For a description of the auxiliary effects of a Setup, see About Auxiliary Effects on page 8‐14 and
Common Parameters on page 8‐14 of the SP4 Musician's Guide.

Global Mode

Global Mode Stored Parameters
Global mode contains parameters that allow you to customize the overall performance and
MIDI settings of the SP4 (see Chapter 9 in The SP4 Musician's Guide for details on each Global mode
parameter). Some Global mode parameters (such as tuning) are reset to a default setting each
time the SP4 is turned on. For other Global mode parameters, the SP4 remembers the setting you
choose and stores your settings in the SP4. To store settings for Global mode parameters, you
must exit Global mode by pressing one of the Program, Setup, or Edit Setup Function buttons.
Global mode settings are saved when exiting Global mode. Stored Global mode settings will be
used by the SP4 the next time the SP4 is powered on.
The following Global mode parameters are stored in the SP4:
• Velocity Map (VMap)
• FX Select (FXSel)
• Channel Enable (Chan1‐Chan16)
• Destination (Dest)
• Bank Select (BankSel)
• Program Change (ProgChg)
• Local Keyboard Channel (LclKbdChan)
• Sysex ID (SysexID)
Note: The parameters listed above will be set to their default values after performing a Hard
Reset. See Chapter 9 in The SP4 Musician's Guide to read about the default values of the
parameters listed above, and for details on performing a Hard Reset.
SP4 V2 Addendum
Edit Setup Mode
3