Steering Damper
5. Connect the headlight connector (3). Install
the front visor (2) by aligning its grommets
(7) with the tabs (8) on the steering stem.
Install and tighten the front visor bolts (1).
(3)
(8)
(2) front visor
(7) grommets
(3) headlight connector
(8) tabs
(1) front visor bolts
100
Servicing Your Honda
17 CRF450X̲31MEY710.indb 100
17 CRF450X̲31MEY710.indb 100
Removal
1. Remove the front visor (page 99).
2. Remove the steering damper mounting bolts
(1), collar A (2), collar B (3) and steering
(2)
damper (4).
(7)
(4)
(1) steering damper mounting bolts
(2) collar A
(3) collar B
(4) steering damper
(1)
Inspection
1. Check the damper rod (1) operation.
The damper rod is fully extended and
compressed by hand. Release the damper rod,
then check that it extends to its maximum
(2)
length.
If the damper rod does not extend to its
maximum length, disassemble and inspection
(1)
for steering damper.
Refer to the Honda Service Manual or see
your dealer.
(3)
(1) damper rod
(1)
2016/06/08 11:46:07
2016/06/08 11:46:07