Nikon D4 Settings Manual page 8

Workfl ow
Optional Batteries and External Power Supplies, Continued
Adapters for Use with the D4
■
The D4 can be used with EH-6 and EH-6a AC adapters; an EP-6 power connector is required to con-
nect the AC adapter to the camera.
1
Remove the battery-chamber cover.
Lift the battery-chamber cover latch, turn it to the open (A) position (
remove the BL-6 battery-chamber cover (
2 Connect the AC adapter.
Pass the DC cable over the power connector cable guide (
until it is at the bottom of the slot, and then insert the DC plug into the DC IN
w
connector (
3 Insert the power connector.
Fully insert the power connector into the battery chamber as shown.
4 Latch the power connector.
Rotate the latch to the closed position (
prevent the power connector being dislodged during operation, be sure that
it is securely latched.
The battery level is not displayed in the top control panel while the camera is
powered by the AC adapter and power connector.
8
Before
Live View
Recording
).
Menu Options Other Settings
w
).
q
) and slide it down
q
) and fold it down as shown (
After
Recording
Recording
q
), and
w
). To