Table of Contents
Advertisement
Automatically scrolling a disc name
— Auto Scroll
If the disc name or track name on an MD
exceeds 8 characters and the Auto Scroll
function is on, automatically scrolls on the
display as follows:
• The disc name appears when the disc has
changed (if the disc name is selected).
• The track name appears when the track has
changed (if the track name is selected).
• The disc or track name appears depending on
the setting when you press (SOURCE) to select
an MD.
If you press (DSPL) to change the display
item, the disc or track name of the MD is
scrolled automatically whether you set the
function on or off.
1
Press (SHIFT), then press (2) (SET UP)
repeatedly until "A.SCRL" appears.
2
Press (4) (n) to select "A.SCRL-ON."
3
Press (SHIFT).
To cancel Auto Scroll, select "A.SCRL-OFF" in
step 2 above.
Displaying the recording date of
the currently selected MD
Press (DSPL) for two seconds during MD
playback.
The recording date of the track is displayed
for about three seconds.
Locating a specific track
— Automatic Music Sensor (AMS)
During playback, push the SEEK/AMS
control up or down once for each track
you want to skip.
To locate succeeding
tracks
To locate preceding
tracks
SEEK/AMS
Locating a specific point in a track
— Manual Search
During playback, push the SEEK/AMS
control up or down and hold for about
two seconds. Release when you have
found the desired point.
To search forward
To search backward
Locating a disc by disc number
— Direct Disc Selection
Press the number button corresponding
to the desired disc number.
The desired disc in the currently selected
changer begins playback.
Scanning the tracks
— Intro Scan
You can play the first 10 seconds of all the
tracks on the currently selected disc.
1
During playback, press (SHIFT), then
press (3) (PLAY MODE) repeatedly until
"INTRO" appears.
2
Press (4) (n) to select "INTRO-ON."
Intro Scan starts.
3
Press (SHIFT).
To go back to the normal playback mode,
select "INTRO-OFF" in step 2 above.
SEEK/AMS
15
EN
Advertisement
Table of Contents
