Specifying The Next Disc To Play; Locating A Specific Track Or A Point In A Track - Sony CDP-CX55 Operating Instructions Manual

Specifying the Next Disc to
Play
You can specify the next disc to play while playing a
disc in Continuous or 1 DISC Shuffle Play mode.
While playing a disc, turn the JOG dial until the disc
number or Disc Memo (see page 22) you want appears
in the display.
ALL DISCS
DISC
* D I S C - 2 O *
After the current disc is played, the next disc you have
specified starts playing.
If you want to skip to the next disc right away, push
the JOG dial while playing the current disc.
To cancel the disc you have specified
Press CONTINUE twice.
Locating a Specific Track or a
Point in a Track
You can quickly locate any track while playing a disc
using the ≠/± (AMS: Automatic Music Sensor)
buttons or number buttons on the remote. You can also
locate a specific point in a track while playing a disc.
Next disc number
CD1
NEXT DISC
3 8
≠/±
Number
buttons
>10
=/+
0/)
To locate Press
± repeatedly until you find the
the next or
succeeding tracks track
≠ repeatedly until you find the
the current or
preceding tracks track
a specific track Number button of the track on the
directly Z
remote
0 (backward)/) (forward) on the
a point in a track
remote and hold down until you find
while monitoring the
sound Z
the point
0 (backward)/) (forward) on the
a point in a track
quickly by observing remote and hold down until you find
the display Z
the point during pause. You will not
hear the sound during the operation.
When you directly locate a track numbered over 10 Z
Press >10 first, then the corresponding number buttons
on the remote.
Note
If "OVER" appears in the display, the disc has reached the
end while you were pressing ). Press 0 or ≠ to go
back.
Playing CDs
Getting Started Playing CDs
15