Instructing The System User; Initial Startup; Operation; Technical Literature - Viessmann VITOCELL 300-W Installation, Operating And Service Instructions

Vitocell 300-W/V, EVIA/EVIB Installation, Operating and Service
Important Regulatory Requirements

Instructing the system user

The installer of the system is responsible to ensure the
system operator/ultimate owner is made familiar with the
system functioning, its activation, and its shut-down.
The operator/ultimate owner should also be instructed to
complete and mail the warranty registration form in order
to be eligible for limited warranty.

Initial startup

Initial start-up must be performed by a qualified heating
contractor. Completion of the Maintenance Record by the
heating contractor is also required.

Operation

Please carefully read the operation and service sections of
this manual prior to operation.
The installer of the system is responsible to ensure the
system operator/ultimate owner is made familiar with the
system functioning, its activation, and its shut-down.
The operator/ultimate owner should also complete and
mail the warranty registration form in order to be eligible
for limited warranty.

Technical literature

Literature applicable to all aspects of the Vitocell:
- Technical Data Manual
- Installation, Operating and Service Instructions
(continued)
The following topics must be covered:
Proper system operation sequence.
Explain the equipment as well as the need for combustion
air. Demonstrate an emergency shut-down, what to do
and what not.
Explain that there is no substitute for proper maintenance
to help ensure safe operation.
The Maintenance Record is located on page 31 of this
manual.
 Failure to abide by all the requirements set out in the
technical literature renders warranty null and void.
Leave all literature at the installation site and advise the
system operator/ultimate owner where the literature
can be found. Contact Viessmann for additional copies.
Safety
5