Fig. 87: Identifying Right Rear Shaft Of Right Shock Absorber
Courtesy of MAZDA MOTORS CORP.
3. Install the left/right front shaft of the SST with front foot No.2 to the bolt shown in the figure.
4. Adjust the positions of the SST side bars so that they are the same height (left and right) and
horizontal.
5. Make sure each joint is securely tightened.
Fig. 88: Positioning Of SST
Courtesy of MAZDA MOTORS CORP.
6. Support the engine using the SSTs.
7. Remove the No.3 engine mount.
2007 Mazda CX-9 Grand Touring
2007 ENGINE Mechanical (MZI-3.5) - CX-9