Creating Your Own Program (Program Play) - Sony CFD-CD777S MK2 Operating Instructions Manual

Creating your own
program
You can arrange the playing order of up to
20 tracks on a CD.
1
Set FUNCTION to CD on the player.
2
Press MODE until "PGM" appears in
the display.
3
Press the number buttons for the tracks
you want to program in the order you
want.
Programed
track
4
Press N to start program play.
GB
16
(Program Play)
Number
buttons
MODE
DISPLAY
N
Playing order
On the player
1 Set FUNCTION to CD.
2 Press PLAY MODE until "PGM" appears in the
display.
3 Press . or > then press DISPLAY/
ENTER for the tracks you want to program in
the order you want.
4 Press u.
To cancel Program Play
Press MODE until "PGM" disappears from
the display.
To check the order of tracks
before play
Press DISPLAY.
Every time you press the button, the track
number appears in the programed order.
To change the current program
Press x once if the CD is stopped and twice
if the CD is playing. The current program
will be erased. Then create a new program
following the programing procedure.
Tips
• You can play the same program again, since the
program is saved until you open the CD
compartment or switch FUNCTION.
• The current program will be erased if you switch
FUNCTION or open the CD compartment.
• You can record your own program. After you've
created the program, insert a blank tape into
deck B and press z on deck B to start recording.