Sony CFD-930L Operating Instructions Manual page 11

3
Tips
• Adjusting the volume or
the audio emphasis
(page 20) will not affect
the recording level.
• CFD-V34L/V37L/930L
only:
If the MW/LW program
makes a whistling
sound after you've
pressed r in step 3,
press PLAY MODE/ISS
(Interference Suppress
Switch) repeatedly until
the noise is at a
minimum.
• For the best results, use
the AC power as a
power source for
recording.
• To erase a recording,
proceed as follows:
1 Press TAPE until
"TAPE" appears in the
display. Insert the tape
whose recording you
want to erase into the
tape compartment.
2 Press r.
Press r to start recording. (( is
depressed automatically).
Use these buttons for additional operations
OPERATE p6
(or POWER)
To
Stop recording
Pause recording
Turn on/off the power
P
Press
p6
P
Press the button again to
resume recording.
OPERATE (or POWER, see
page 2)
11 EN
Basic Operations