Buick LeSabre 1965 Service Manual page 250

5 - 3 6 SERVICE PROCEDURES
SUPER TURBINE " 3 0 0 '
Figure 5-127
b. Removal of Forward
Clutch
Figure 5-130
c. Removal of Low Band
Figure 5-128
1. Remove input shaft from
forward clutch drum. See Fig-
ure 5-128.
Figure 5-129
2. Examine input shaft oil rings.
If nicked or worn, remove rings.
See Figure 5-129.
3. Remove forward clutch assem-
bly by pulling straight out of case.
Make certain low band has been
released before attempting to re-
move forward clutch. See Fig-
ure 5-130.
Figure 5-131
1. Remove low band and struts
from inside the case. See Fig-
ure 5-131.
2. Remove low band adjusting
screw. See Figure 5-132.
5 - 1 2 REMOVE SPEED-
OMETER DRIVEN
GEAR, REAR
BEARING RETAINER,
RETAINER OIL SEAL
RETAINER BUSHING,
AND GOVERNOR
a. Removal of Speedometer
Driven Gear
NOTE: Transmission need not
be removed from the car to per-
form the following operations,
paragraphs 5-12 and 5-13.
Figure 5-132
1. With transmission in hori-
zontal position, remove speed-
ometer d r i v e n gear s l e e v e
retainer with a 1/2" wrench. See
Figure 5-133.
Figure 5-133
2. Remove speedometer d r i v e n
gear sleeve. See Figure 5-134.
Figure 5-134
b. Removal of Rear
Bearing Retainer
1. Remove four (4) rear bear-
ing retaining bolts with a 9/16"