Additional Information; Attaching And Detaching The Monitor - Sony XVM-B62 Operating Instructions Manual

When installing the
monitor on the dashboard
Be sure to connect the parking cord
(Light green) to the parking brake
switch cord. The mounting position of
the parking brake switch cord depends
on your car. Consult your car dealer or
your nearest Sony dealer for further
details.
Foot brake type
Hand brake type
Using the tap
Attach the supplied tap to the end of the
parking cord (Light green) and the
parking brake switch cord.
Tap (supplied)
Note
If the parking brake switch cord is too thin,
connect the parking cord (Light green) to
the parking brake switch cord directly
without using the tap.
10
Parking brake
switch cord
Parking brake
switch cord
Parking brake
switch cord
Parking cord
(Light green)
x
Additional
Information
Attaching and detaching
the monitor
Detaching the monitor from the
collar
Note
Be careful not to pull out the cable too
much when detaching the monitor from
the collar.
Insert a plastic card (not supplied)
between the collar and the top of the
monitor.
The catches are released, and you can
detach the monitor from the collar.
Plastic card (not supplied)
Attaching the monitor to the collar
Set the monitor to the collar securely
until you hear click sound.
collar