Battery Charging - Honda HRM300 Manual

dummyhead dummyhead

BATTERY CHARGING

Before the installation, the battery will need to be charged.
After the initial setup of the lawnmower (page 3-15), follow the below steps.
Set the charging socket of the lawnmower to the plug of the station.
Ensure that the charging socket on the mower and docking station are in a well ventilated area that is protected from the weather.
CHARGING
SOCKET
POWER OUTLET(HOUSE)
Press the manual stop button and you can check the charging condition on the display.
MANUAL STOP BUTTON
Before installation can proceed, the battery must be at minimum 70% charged.
If the battery is discharged below 70%, "Auto mode" may not start.
LAWNMOWER
DOCKING STATION
TRANSFORMER
POWER CORD
DISPLAY
DOCKING STATION
LAWNMOWER
INSTALLATION
CHARGING
PLUG
3-5