Top Cover Disassembly/Assembly - Honda HRM300 Manual

dummyhead dummyhead

TOP COVER DISASSEMBLY/ASSEMBLY

Remove the top cover (page 7-2).
Remove the two screws [1] and front cover [2].
Remove the height adjust cover [3].
Slide the control cover shaft [1] to the left and remove
the right end of the control cover shaft from the hole of
the top cover [2].
Remove the control cover [3] by releasing the left end of
the control cover shaft from the hole of the top cover.
Remove the control cover shaft and control cover
spring [4] from the control cover.
Remove the stop switch bracket [1] in the direction as
shown while pushing the manual stop button [2].
Be careful not to bend the stop switch bracket [1].
Remove the manual stop button shaft [1] in the direction
as shown.
Remove the manual stop button [2] and manual stop
button spring [3].
[1]
[2]
[1]
[4]
[2]
[3]
COVER
[3]
[3]
[2]
[1]
[2]
[1]
7-3