Other Functions; Using The Rotary Commander - Sony XR-C5090R Operating Instructions Manual

Other Functions

Using the rotary
commander
The rotary commander works by pressing
buttons and/or rotating controls.
You can control the optional CD/MD unit by
the rotary commander.
By pressing buttons (the SOURCE
and the MODE buttons)
(SOURCE)
EN
Every time you press (SOURCE), the
source changes as follows:
TAPE n TUNER n CD n MD
Pressing (MODE) changes the operation in the
following ways:
• the tape transport.
• the band, FM1 n FM2 n FM3 n MW n LW.
• the CD/MD unit.
Tip
You can turn on this unit by pressing (SOURCE) on the
rotary commander.
By rotating the control (the SEEK/
AMS control)
12
By rotating the control while
pushing in (the PRESET/DISC
control)
(MODE)
Other operations
Rotate the VOL control
to adjust the volume.
Rotate the control momentarily and
release it to:
•Locate the beginnings of the tracks on the
tape. Rotate and hold the control, and
release it to fast-wind the tape. To
playback, rotate and hold the control
again, and release it.
•Locate a specific track on a disc. Rotate
and hold the control to locate the specific
point in a track, then release it to start
playback.
•Tune in the stations automatically. Rotate
and hold the control to tune in the specific
station.
Push in and rotate the control to:
•Receive the stations memorized on the
preset buttons.
•Change the disc.
XR-C6090R:
Press (FILE) for two seconds
to change the Disc memo.
XR-C5090R:
Press (DSPL) to change the
displayed items.
Press (ATT)to
attenuate the
sound.
Press (OFF) to
turn off the unit.
Press (SEL)
to adjust
and select.