LIGHTING SYSTEM
9. Headlight Beam Leveler Sys-
tem
A: SCHEMATIC
1. HEADLIGHT BEAM LEVELER
<Ref. to WI-180, SCHEMATIC, Headlight Beam
Leveler System.>
B: INSPECTION
1. HEADLIGHT BEAM LEVELER ACTUA-
TOR
1) Turn on the headlights.
2) Confirm the headlight beam level is lowered by
changing the switch position to 0 - 1 - 2 - 3.
2. HEADLIGHT BEAM LEVELER SWITCH
Connect the battery, headlight beam leveler switch
connector and circuit tester as shown in the figure.
Measure the voltage at each switch position.
v
Switch position
Terminal No.
0
7 (+) and battery (−)
1
6 (+) and battery (−)
2
3 (+) and battery (−)
3
4 (+) and battery (−)
HEADLIGHT BEAM LEVELER SYSTEM
4 3 2 1
8 7 6 5
LI-00237
Standard
Battery voltage
Battery voltage
Battery voltage
Battery voltage
LI-10