Other Functions; Adjusting The Sound Characteristics; Changing The Sound And Display Settings - Sony XR-1300R Operating Instructions Manual

Other Functions

Adjusting the sound
characteristics
You can adjust the bass, treble, balance, and
fader.
You can store the bass and treble levels
independently for each source.
1
Select the item you want to adjust by
pressing (SOUND) repeatedly.
BAS (bass) t TRE (treble) t
BAL (left-right) t FAD (front-rear)
2
Adjust the selected item by pressing
either side of (SEEK).
Adjust within three seconds after selecting
the item.
Changing the sound and
display settings
The following items can be set:
•CLOCK (page 7).
•CT (Clock Time) (page 14).
•BEEP – to turn the beep sound on or off.
•D.INFO (Dual Information) to display the
clock and the play mode at the same time
(ON) or to display the information
alternately (OFF).
•M.DSPL (Motion Display) – to turn the
motion display on or off.
1
Press (MENU).
2
Press either side of (PRST) repeatedly
until the desired item appears.
Each time you press (–) side of (PRST), the
item changes as follows:
CLOCK t CT t BEEP t D.INFO t M.DSPL
3
Press (+) side of (SEEK) to select the
desired setting (Example: ON or OFF).
4
Press (ENTER).
After the mode setting is complete, the
display returns to normal playback mode.
GB
15