Power Supply; Power Supply X124 - Siemens SIMOTION D4 Series Equipment Manual

The enables for the drive units and/or motors (active line module, motor module) connected
to the control unit can be switched using the digital inputs.
Electrically isolated inputs
The control unit has 8 digital inputs.
The isolated inputs can be used as freely addressable inputs.
Bidirectional inputs/outputs
The control unit has 8 digital inputs/outputs.
Six of the eight digital inputs/outputs can be used as "fast inputs." All eight digital
inputs/outputs can be used as freely addressable inputs or homing inputs. When
parameterized as digital outputs, the digital input/outputs can be used as freely addressable
outputs.
4.5

Power supply

4.5.1

Power supply X124

Features of the interface
Table 4-11
Features
Connector type
Connection possibility:
Current carrying capacity
Maximum cable length
Interface assignments
Table 4-12
Pin
1
2
3
4
Signal type: VI = Voltage input (power supply) VO = Voltage output (power supply)
D4xx
Manual, 12.2004, 6AU1900-1AJ32-0BA0
Interface X124
Power supply X124
Signal name
P24
P24
M
M
Type
Combicon
up to 2.5 mm
2
10 A, maximum
10 m
Signal type
VI
VI
VO
VO
Interfaces
4.5 Power supply
Meaning
Power supply 24 V
Ground
4-11