Your Dishwasher - Baumatic BDW2W Installation And Maintenance Instructions Manual

h) THEN, APPLY THE CONDENSATION STRIP.
The Co ndensa tion Strip must be fitted to th e
under sid e of th e worktop above your dis hwa sher
to protect it ag ainst an y moisture. Its purpo se is
to defl e ct steam ri sing from your applia n ce to
protect y our worktop' s underside.
x The
dish washer .
x Ensure the surface is cl
sti cking to undersi de of the worktop
x Separ ate the backin g paper from th e
strip.
x Stick to t he unders ide of t h e worktop.
Note: Failure to attach strip could
result in damage to the underside of
your work surface!
i) NOW YOU ARE READY TO PUSH THE DISHWASHER
INTO POSITION
NOTE
–
MAKE SURE YOU
DISHWASHER ON ITS SLIDE RAILS
(See figure on right).
THEN MOVE IT INTO THE CABINET
RECESS (AS PICTURED ON RIGHT).
ENSURING THAT IT IS BACKED UP
AGAINST THE WALL. ATTACH THE
FURNITURE DOOR (STEP
PICTURED ON RIGHT) IF YOU HAVE
NOT ALREADY DONE SO.
YOU ARE NOW READY TO SECURE
YOUR APPLIANCE TO THE CABINET
AREA (STEP 5 AS PICTURED ON
RIGHT).
Note: The 'Aesthetic Panel' is
*
the furniture door which you may
have already installed (see pp.
25-26).
j) NOW GET THE DISHWASHER LEVEL.
NOTE:
DISHWASHER MUST BE
LEVEL
DISH RACK OPERATION
strip is located sid e in
ean pri o r to
(SEE FIGURE BELOW):
HAVE THE
1 AS
YOUR
FOR PROPER
your
.
AND
PERFORMANCE.
WARNING!
30
WASH