Handwriting On The Screen Of The Monitor - Sharp PN-60TA3 Operation Manual

Handwriting on the screen of the monitor

You can handwrite a memo on the Pen Software screen of the host with a client.
1. Android/iOS device: On the main screen on the client, tap [Open menu] - [Hand
Writing].
Windows/Mac OS device: On the main screen on the client, tap [Handwriting], and
then select a pen.
2. Draw on the handwriting area.
When you handwrite on the screen displayed on the client, the content that you write
appears on the Pen Software screen of the host.
Android/iOS Device
(1)
(2) (3) (4) (5)(6)(7)(8) (9)
Windows/Mac OS Device
(1)
(4) [(5)] (9) (6) (7) (8)
(1) Handwriting area: The area where handwriting operations are possible.
(2) Show/hide operation menu: Shows/hides the operation menu.
(3) Change operation menu position: Changes the display position of the operation
(4) Pen: Configures the pens and draws text and graphics. (page 20)
For Windows devices, touch and select the pen type from the displayed pull-down
menu.
(5) Eraser: Deletes a drawn line.
For Windows devices, touch and select "Eraser" from the displayed pull-down
menu.
(6) Zoom out: Reduces the current screen.
(7) Zoom in: Enlarges the current screen.
(8) Fit: Returns the screen from an enlarged or reduced state to its normal size.
The entire screen is displayed maintaining its aspect ratio.
(9) Screen: Adjusts which portion of the screen to display.
TIPS
• In handwriting mode, operation permission is automatically obtained from the host.
• When "Do not allow remote control" is selected in "Control Setting" for the host
(page 33), remote operation is not possible.
• Pen Software version 3.3 or later must be installed in order to use the Eraser function.
- 18 -
menu.