Connecting The Refrigerator-Oven Combination - Dometic RMLT 933 Series Installation Manual

Absorber-refrigerator with oven
Hide thumbs Also See for RMLT 933 Series:
Table of Contents

Advertisement

Available languages

Available languages

Connecting the refrigerator-oven combination

7
Connecting the refrigerator-oven
combination
7.1
Connecting to the gas supply
A
NOTICE!
• This refrigerator-oven combination may only be connected to the
gas supply by a specialist in accordance with the applicable
guidelines and standards.
• Only use cylinders of propane or butane gas (not natural gas or city
gas) with an approved pressure reduction valve and suitable head.
Compare the pressure information on the type plate with the
pressure information on the pressure regulator on the propane or
butane gas cylinder.
• Only operate the refrigerator-oven combination at the pressure
shown on the type plate.
• Please note the pressures which are permitted in your country. Use a
DIN-DVGW-approved pressure regulator with a fixed setting:
– The following applies for Germany: DIN EN 12864.
– The following applies for Europe: EN 732 and EN 1949.
I
NOTE
The refrigerator-oven combination is equipped for a connection
pressure of 30 mbar. Use a 50/30 mbar pressure regulator when con-
nected to a 50 mbar system.
It must be possible to shut off the refrigerator-oven combination from the gas line
separately by means of a shut-off device. The shut-off device must be easily
accessible.
➤ Connect the refrigerator-oven combination securely by hand to the gas supply
(fig. r, page 10).
The following applies for Europe: Use a cutting ring fitting in accordance with
EN 1949.
A hose connection is not permitted.
➤ Have a leak test and a flame test performed in accordance with EN 1949 by an
authorised specialist.
Ensure you are issued with a certificate of inspection.
26
RMLT9xxx
EN

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents