Cleaning And Maintenance; Cleaning The Shaver Under The Tap - Philips SW170 Manual

8
English

Cleaning and maintenance

Cleaning the shaver under the tap

exclusively with this appliance for a period of 3
weeks.
- For the best results on skin comfort, pre-trim
your beard if you have not shaved for 3 days or
longer.
Dry shaving
1 Switch the shaver on.
2 Move the shaving heads over your skin in
circular movements to catch all hairs growing in
different directions. Exert gentle pressure for a
close, comfortable shave.
Note: Do not press too hard, this can cause skin
irritation.
3 Switch off the shaver and clean it after each
use.
4 Put the protection cap on the shaver to protect
shaver heads.
Clean the shaver after every shave for optimal
performance.
Always check if the water is too hot, to prevent
burning your hands.
Never dry the shaving unit with a towel or tissue,
as this may damage the shaving heads.
While rinsing the shaving unit, water may drip out
of the base of shaver. This is a normal occurrence.
1 Switch the shaver off, unplug from outlet and
remove power cord from the shaver.