User manual (user manual) (ver.f10) (spanish) (185 pages)
Summary of Contents for Samsung S III
Page 1
Heat Gun / Blow Dryer • This guide will show you how to disassemble the Samsung Galaxy S III mobile phone, assisting in making the repair of the device both simple and inexpensive. Following the steps we have provided will help you quickly, and safely, replace not only a broken display, but also other internal components that may have become damaged.
Page 2
Samsung S III - Battery Step On the headphone jack side of the phone, insert • the plastic opening tool in the notch that is in the back case. Working your way around the entire phone, gently free the clips.
Page 3
Samsung S III–Disassemble Guide Step 4 – Headphone Jack/Speaker Assembly Locate and remove the ten small Phillips screws • (#00) that secure the plastic frame to the front panel assembly. Step Locate the connector for the headphone jack/ • speaker assembly. Using the plastic opening tool, pry it up and out of its socket.
Samsung S III–Disassemble Guide Step 7 – Rear-Facing Camera For the next few steps, the plastic opening tool will • be used to disconnect several connections to allow you to remove the phone’s motherboard. Start with the front-facing camera connector. Locate •...
Page 5
Samsung S III–Disassemble Guide Step The Wi-Fi antenna plug is the last connection to be • disconnected from the motherboard. Locate it and pry it from its plug. Step Locate and remove the one small Phillips screw • (#00) that secures the motherboard into the phone.
Page 6
Samsung S III–Disassemble Guide Step Still attached to the motherboard is the rear-facing • camera. Using the plastic opening tool, pry up the camera connector. You can now remove the rear-facing camera from • the motherboard. Step 14 – Front Facing Camera Locate and remove the one small Phillips screw •...
Page 7
Samsung S III–Disassemble Guide Step 16 – Wi-Fi Antenna Using the spudger, gently maneuver and work the • Wi-Fi antenna away from the front display assembly. Step 17 – Volume Button & Ear Speaker Cable Utilizing the flat end of the spudger, maneuver the •...
Page 8
Samsung S III–Disassemble Guide Step Repeat the same process from the previous • step to remove the power button. Step 20 – Vibrator The vibrator unit is secured into the phone with a • generous amount of adhesive. Using the spudger, gently pry it out of the phone.
Page 9
Samsung S III–Disassemble Guide Step At this time, the LCD & touch screen are fused • together and cannot be separated. They are secured to the frame of the phone using a lot of adhesive that will require heat and patience to separate.
Page 10
Samsung S III–Disassemble Guide Page 10 http://www.fixez.com/...