Set The Top-Of-Form - Oki MICROLINE MX Series Quick Setup Manual

Set The Top-Of-Form

Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
Load The Paper (Standard Configuration)
Every time you load paper, you set the top-of-form (TOF) location.
This procedure must be performed the first time paper is introduced
into the printer, and every time new paper is loaded.
1. Press ON LINE/CLEAR to place the printer in offline mode.
The LCD will display "OFFLINE / QUICK SET-UP."
Figure 26. Raising the Platen Lever
2. Raise the platen lever as far as it will go. This allows you to turn
the vertical position knob freely to align the top-of-form.
Set The Top-Of-Form
Vertical Position Knob
Platen Lever
35