When To Change The Motor Protection Filter; Changing The Motor Protection Filter - Miele Complete C3 Operating Instructions Manual

 Pull the FilterBag out by the grip on
the collar.
 Insert the new FilterBag into the blue
holder as far as it will go. Leave it
folded up when you take it out of the
box.
 It should be unfolded as far as possi-
ble in the dust compartment.
 Close the dust compartment lid se-
curely, making sure it clicks into posi-
tion. Take care not to trap the Fil-
terBag when doing so.
An empty operation lock prevents
the FilterBag from closing without a
FilterBag in place. Do not force it!
 Insert the hose connector into the
suction socket on the vacuum
cleaner until it clicks into position. To
do this, line up the guides on the two
pieces.
When to change the motor protection
filter
Replace this filter every time you start a
new packet of filter bags.
Every packet of original Miele filter bags
contains a motor protection filter. Multi-
packs contain four motor protection fil-
ters.

Changing the motor protection filter

 Open the dust compartment lid.
 Pull the FilterBag out by the grip on
the collar.
25