Data Transmission; Search For Sensor; Temperature; Select Temperature Unit - Radio Shack MTR661 User Manual

DATA TRANSMISSION

Data is sent from the sensor every 80 seconds. The
reception icon shown in the Outdoor Temperature
Area shows the status.
ICON
--- shows in Outdoor
Temp Area

SEARCH FOR SENSOR

To search for a sensor, press and hold SEARCH for
2 seconds.
NOTE
If the sensor is still not found, check the
batteries, obstructions, and remote unit location.
NOTE
Signals from household devices such as
doorbells, electronic garage doors, and home security
systems may cause temporary reception failure. This
is normal and does not affect general product
performance. The reception will resume once the
interference ends.
DESCRIPTION
Main unit is searching for
sensor.
A channel has been found.
Channel 1 is selected
The selected sensor cannot
be found. Search for the
sensor or check batteries.

TEMPERATURE

This product can display current, minimum, and maximum
temperatures collected by the remote sensor and main
(indoor) unit.
Outdoor data is collected and displayed every 80
seconds. Indoor data is collected and displayed every
10 seconds.

SELECT TEMPERATURE UNIT

Press the ºC / ºF switch into the desired location. The
switch is located in the main unit battery compartment.
The setting for the main unit overrides the remote sensor
setting.

MINIMUM / MAXIMUM RECORDS

Press MEMORY to toggle between current, maximum
(MAX) and minimum (MIN) records. To clear the records,
press and hold MEMORY for 2 seconds. A beep will
sound to confirm that the memory has been cleared.
8