Table of Contents
Advertisement
Hardware Installation
The following diagrams provide you a basic installation for your
MP54GBT2. The instruction below is suitable for most com-
puters with MiniPCI slot. For more information about the
MiniPCI module, please refer to your computer's manual.
Installing MP54GBT2:
1.
Locate the MiniPCI slot on the mainboard.Place your
MP54GBT2 over the MiniPCI slot (at an angle of 30
degrees). Then, gently insert it into the slot until the
golden finger of the card gets fully inserted.
2.
Press down the card, and the retaining clips (on two
sides of the slot) will lock onto the notches of the card.
3.
Connect the attenna's cable to the connector on the card.
Foolproof notch
1 0
Advertisement
Table of Contents
