Troubleshooting - Sony PEGA-MSC1 Memory Stick Camera Module Instructions (primary manual) Operating Instructions Manual

Troubleshooting

Try the solutions listed below before calling for service. If there is still a
problem after trying these solutions, call your Sony dealer or local
authorized Sony Service facility.
Symptom
Nothing is displayed in
the window.
Warning of memory
shortage is displayed, and
images cannot be
recorded.
Any operation does not
work.
There are lateral stripes, a
ring-shaped pattern, or
lighting spots on the
display.
24
t Slide the HOLD switch on the CLIÉ
handheld to cancel the HOLD
function.
t Reset the software. Refer to the
supplied operating instructions for an
explanation of this procedure.
t Delete unnecessary images in
PictureGear Pocket.
t Delete unnecessary data in other
applications.
t Delete unnecessary applications from
your CLIÉ handheld.
t You cannot perform any other
operations while images are being
recorded. Try again after the recording
process has ended.
t Slide the HOLD switch on the CLIÉ
handheld to cancel the HOLD
function.
t Reset the software. Refer to the
supplied operating instructions for an
explanation of this procedure.
t The display image may be distorted
due to conditions such as the
temperature or the lighting. Try
moving the camera to different
temperature or lighting conditions.
Remedy