Setting The Shot Id - Sony XDCAM PDW-510 Operation Manual

U12 SHOT DISP
SHOT DATE
SHOT TIME
SHOT MODEL NAME :
SHOT SERIAL NO
SHOT ID SEL
SHOT 16:9 ID
SHOT BLINK CHARA:
You can set the following items on the SHOT DISP
page.
Item Description
SHOT DATE Selects whether or not the shot data is
superimposed (ON or OFF).
SHOT TIME Selects whether or not shot time is
superimposed (ON or OFF).
SHOT MODEL Selects whether or not the model name
NAME is superimposed (ON or OFF).
SHOT SERIAL Selects whether or not the serial
NO. number is superimposed (ON or OFF).
Selects whether or not the shot ID set
SHOT ID SEL
on the SHOT ID
superimposed (1 to 4 or OFF).
SHOT 16:9 ID Selects whether or not the 16:9 mode
indicator is superimposed (ON or OFF).
SHOT BLINK Selects whether or not the blinking * is
CHARA superimposed (ON or OFF).
1) To carry out superimposed recording, select the SHOT ID number (1 to 4).
Not to carry out superimposed recording, select "OFF".
3
Turn the MENU knob to move the b mark to the item
you want to set, and press MENU knob.
The b mark on the left of the selected item changes to
a z mark and the z mark on the left of the setting
changes to a ? mark.
4
Turn the MENU knob to select whether or not to
record the selected item superimposed on the color
bars, and press the MENU knob.
The z mark on changes to a b mark and the ? mark
changes to a z mark.
5
To continue setting other items, repeat steps 3 and 4.
6
To end the menu operation, set the MENU ON/OFF
switch to OFF or close the cover of the menu operating
section.
To carry out superimposed recording
To actually record the items selected for superimposed
recording on the SHOT DISP page, set the OUTPUT/DCC
switch to BARS, DCC OFF.
118
7-2 Status Display on the Viewfinder Screen
: OFF
: OFF
OFF
: OFF
: OFF
: OFF
OFF
1)
page is
The items selected for superimposed recording appear on
the screen and are recorded superimposed on the color
bars.

7-2-7 Setting the Shot ID

On the SHOT ID page of the USER menu, you can set a
shot ID of up to 12 alphanumeric characters, spaces, and
symbols.
When the OUTPUT/DCC switch is set to BARS, DCC
OFF, this shot ID is output with the color bar signal. The
shot ID comprises ID1 to ID4, and the setting can be
changed using the SHOT DISP page of the USER menu.
You can select the SHOT ID to be recorded superimposed
on the color bars on the SHOT DISP page.
Note
When the menu is displayed, the shot ID is not displayed
even if the color bar signal is output.
To set the shot ID, proceed as follows.
MENU knob
Setting the shot ID
1
Set the MENU ON/OFF switch to ON.
The last accessed menu page appears on the screen.
2
Turn the MENU knob until the SHOT ID page
appears, and press the MENU knob to select the page.
U11 SHOT ID
ID-1 : ssssssssssss
ID-2 : ssssssssssss
ID-3 : ssssssssssss
ID-4 : ssssssssssss
3
Turn the MENU knob to move the b mark to the ID
(one of ID-1 to ID-4) you want to set, and press the
MENU knob.
A x mark appears over the first character position in
the string, and characters can now be input.
CANCEL/PRST /
ESCAPE switch
MENU ON/OFF switch
TOP