Sony Handycam HDR-HC3E Operating Manual page 65

DATE/TIME
Displays the date and time.
CAMERA DATA (below)
Displays camera setting data.
60min
6
A SteadyShot off
B Exposure
C White balance
D Gain
E Shutter speed
F Aperture value
• The exposure adjustment value (0EV), a shutter
speed, and the aperture value appear when still
images on a "Memory Stick Duo" are played
back.
• appears for a picture recorded using a flash.
• In the DATE/TIME data display, the date and
time are displayed in the same area. If you
record a picture without setting the clock, [-- --
----] and [--:--:--] will appear.
• During Easy Handycam operation, you can set
only [DATE/TIME].
REMAINING
B AUTO
Displays the remaining tape indicator for
about 8 seconds in situations such as those
described below.
• When you set the POWER switch to PLAY/
EDIT or CAMERA-TAPE with a cassette
inserted.
• When you touch
ON
Always displays the remaining tape
indicator.
0:00:00:00
1
2
AUTO
3
100 AWB
F1. 8 9dB
5 4
(Play/Pause).
REMOTE CTRL (Remote control)
The default setting is [ON], allowing you to
use the supplied Remote Commander
(p. 36).
• Set to [OFF] to prevent your camcorder from
responding to a command sent by another VCR
remote control unit.
REC LAMP (Recording lamp)
The camera recording lamp will not light up
during recording when you set this to
[OFF]. (The default setting is [ON].)
BEEP
B ON
A melody sounds when you start/stop
recording, or operate the touch panel.
OFF
Cancels the melody.
DISP OUTPUT
B LCD PANEL
Shows displays such as the time code on
the LCD screen and in the viewfinder.
V-OUT/PANEL
Shows displays such as the time code on
the TV screen, LCD screen, and in the
viewfinder.
MENU ROTATE
B NORMAL
Scrolls the menu items downwards by
touching .
OPPOSITE
Scrolls the menu items upwards by
touching .
65
Continued ,