Sony HD1000N Operating Manual page 16

Step 3: Charging the battery pack (Continued)
To remove the battery pack
Slide the POWER switch to OFF (CHG).
Push the [BATT (battery) RELEASE]
button and remove the battery pack.
[BATT (battery)
RELEASE]
When storing the battery pack
Fully discharge the battery before storing it
for an extended period (p. 92).
To check the remaining battery
(Battery Info)
Set the POWER switch to OFF (CHG), then
press DISPLAY/BATT INFO.
After a while, the approximate recordable
time and battery information appear for
about 7 seconds. You can view the battery
16
information for up to 20 seconds by
pressing DISPLAY/BATT INFO again
while the information is displayed.
Remaining battery (approx.)
Recording capacity (approx.)
You can check the remaining battery charge
on the LCD screen.
Indicator Status
Sufficient power remaining
Battery low, recording/
playback will stop soon.
Replace the battery with a
fully charged one, or charge
the battery.
Charging time
Approximate time (min.) required when
you fully charge a fully discharged battery
pack.
Battery pack
NP-F570 (supplied)
NP-F770
NP-F970
Recording time
Approximate time (min.) available when
you use a fully charged battery pack.
Battery pack
Recording
Format
NP-F570
(supplied)
60
65
Charging time
260
450
630
Continuous Typical
recording recording
time time*
HDV DV HDV DV
180 190 95 105
200 205 105 115