Table of Contents
Advertisement
Changing the MENU settings
Icon/item
HiFi SOUND
EDIT
TBC
TBC stands for "Time Base Corrector".
DNR
DNR stands for "Digital Noise Reduction".
NTSC PB
LCD B. L.
LCD COLOUR
Note on NTSC PB
When you play back a tape on a Multi System TV, select the best mode while viewing the picture on
the TV.
In more than 5 minutes after removing the power source
The "WIND" "COMMANDER" "EDIT" and "HiFi SOUND" items are returned to their factory
settings.
The other menu items are held in memory even when the battery is removed, as long as the lithium
battery is installed.
Notes on LCD B.L.
•When you select "BRIGHT", battery life is reduced by about 10 percent during recording.
•When you use power sources other than the battery pack, "BRIGHT" is automatically selected.
82
Mode
Meaning
r STEREO
To play back a stereo tape or dual sound track tape
1
To play back a monaural tape or dual sound track
tape with main sound
2
To play back a dual sound track tape with sub
sound
r OFF
—
ON
To minimize picture deterioration when editing
r ON
To correct jitter
OFF
To not correct jitter. Set TBC to OFF when playing
back a tape on which you have dubbed over and
recorded the signal of a TV game or similar
machine.
r ON
To reduce picture noise
OFF
To reduce a conspicuous afterimage when the
picture has a lot of movement
r ON PAL TV
To play back a tape recorded on your camcorder on
a PAL system TV
NTSC 4.43
To play back a tape recorded in the NTSC colour
system on a TV with the NTSC 4.43 mode
r BRT NORMAL
To set the brightness on the LCD screen normal
BRIGHT
To brighten the LCD screen
To adjust the colour on the LCD screen, turn and
press the SEL/PUSH EXEC dial
To lighten
To darken
POWER
switch
PLAYER
PLAYER
PLAYER
PLAYER
PLAYER
PLAYER
CAMERA
PLAYER
CAMERA
Advertisement
Table of Contents
