Activating Send All Calls; Blocking Your Extension From Displaying During Calls - Avaya J139 Using Manual

Advanced features
• Ensure that EC500 is configured on your mobile phone.
• Ensure that you administrator sets your personal phone number as your destination number.
Procedure
1. Press Main menu, and scroll to Features.
2. Press one of the following:
• Select
• OK
3. Scroll to Extend Call, and press Select.
4. Press OK.
You will receive a call on your cell phone to answer the extended call.

Activating Send All Calls

About this task
When Send All Calls (SAC) feature is on, your incoming calls go directly to a predefined coverage
number, typically your voice mail. Incoming calls ring once at your extension and then go directly
to a number which is set by your system administrator.
You can also turn Send All Calls on or off by using the phone Features list.
Note:
Do not enable the SAC feature in case you selected the cover all option for the coverage path.
Enabling both features at the same time can cause duplicate entries in the call log.
Procedure
1. Navigate to the Features screen.
2. Scroll to choose Send All Calls.
3. Press Select or OK or the corresponding line button to activate the feature.

Blocking your extension from displaying during calls

About this task
You can override the system (default) setting to display your extension on outgoing calls. Use the
Calling Party Number Blocking feature to prevent your number from displaying.
Procedure
1. From the Phone screen, access the Features screen.
2. Select CPN Block.
December 2018 Using Avaya J139 IP Phone SIP
Comments on this document? infodev@avaya.com
44