Advertisement
CAUTION:
Do Not use the test strips or control solution after the expiry
date printed on the vial or the discard date, whichever comes
first, or your results may be inaccurate.
CAUTION:
Do Not use your test strips if your vial is damaged or left
open to air. This could lead to error messages or inaccurate
test results. Contact customer service at 1800 225544 or
022-30845544 immediately if the test strip vial is damaged.
Cleaning your meter
To clean your meter, wipe the outside with a soft cloth dampened
with water and mild detergent. Do Not use alcohol or another
solvent to clean your meter.
To disinfect the meter, prepare a solution of one part household
bleach to nine parts water. Wipe the meter with a soft cloth
dampened with this solution. After disinfecting, allow the meter
surface to remain wet for approximately 5 to 10 minutes and wipe
dry with a soft cloth.
Do Not get any liquids, dirt, dust, blood, or control solutions inside
the meter through the test port. Never spray cleaning solution on
the meter or immerse it in any liquid.
Cleaning your lancing device and clear cap
To clean these items, wipe them with a soft cloth dampened
with water and mild detergent. Do Not immerse the lancing
device in any liquid.
To disinfect these items, prepare a solution of one part
household bleach to nine parts water. Wipe the lancing
device with a soft cloth dampened with this solution.
Immerse the caps only in this solution for 30 minutes. After
disinfecting, rinse briefly with water and allow both to air dry.
If your lancing device is different than the one shown in this
Owner's Guide, check the instructions for your lancing device
for information on its care and maintenance.
18
Hide quick links:
Advertisement
