Customer Displays; Switching The Operator Display Off; Switching The Operator Display On - Olivetti ECR 8200S Quick Manual

O C
PERATOR AND USTOMER
The operator LCD display has a Menu system providing
access to all cash register functions. You can raise and
tilt the display to obtain the most comfortable viewing
position. The pop-up, single-line, customer display can
be raised and swivelled to obtain the most favorable
position for customer viewing. When sales transaction
data is not displayed, scrolling messages can be
programmed to appear according to the cash register
state (idle, off and so on).
S O
WITCHING THE PERATOR
To switch on the operator display press the
on the keypad. The Main menu is displayed from which
you can select:
•
Registration mode - to enter sales transactions as a
clerk (also in training mode)
•
Manager mode - to enter all sales transactions as a
Manager (also in training mode)
•
X1 & X2 Report mode - to print X financial reports
•
Z1 & Z2 Report mode - to print Z financial reports
•
Programming Mode - to set up the cash register
and program sales functions
•
Off mode - to switch off the menus and the operator
display.
See "Using the Menus" for how to navigate the menus.
D
ISPLAYS
S
To switch off the operator display, first terminate any
sales transactions, then:
1. Press
2. Use
D O
ISPLAY N 3. Press
The cash register is switched off. A scrolling message
key
appears on the customer display, if programmed.
S
The Operator Display (OD) and Customer Display (CD)
symbols and messages can be understood as follows
(refer to figures 6 and 7 respectively):
REGISTRATION MODE
O.D.
O
WITCHING THE PERATOR
to display the Main menu.
to scroll to the option Off Mode.
.
M
YMBOLS AND ESSAGES
Ref. C.D. Meaning
(2) n/a Training mode.
(4) n/a Hold mode - A transaction has
been temporarily put on hold.
(4) n/a Recall mode - A transaction on Hold
has been recalled for completion.
D O
ISPLAY FF
6