Sony HAP-Z1ES Help Manual page 144

Help Guide
How to Use
HDD AUDIO PLAYER
HAP-Z1ES
Controlling the brightness (Brightness)
You can adjust the screen to your desired brightness to suit the brightness of your surroundings. If you set the brightness
to [Off], the DSEE lamp goes off.
1. Select [Settings] - [System Settings] in the Home screen.
2. Select [Brightness].
3. Select your desired item from the menu.
Descriptions of menu settings
Selectable menu items are described below.
Off:
The backlight of the display and the DSEE lamp are turned off. The power consumption is the lowest of all of the
settings.
Low:
The backlight of the display is dim and the power consumption is low.
Mid:
The backlight of the display is set to medium brightness.
High:
The backlight of the display is bright and the power consumption is high.
Max:
The backlight of the display is at its brightest. The power consumption is the highest of all of the settings (factory default
setting).
Note
The power lamp lights up even if the brightness of the screen is set to [Off].
If the brightness of the screen is set to [Off], the brightness of the backlight changes to [Low] for a fixed period of time
when you start up the HDD AUDIO PLAYER or perform the operation on the screen.
If the brightness of the screen is set to [Off], the brightness of the backlight briefly changes to [Low] during the
following processes:
Updating the software
Formatting a hard disk drive
Rescanning a hard disk drive
144