Sony Handycam DCR-HC26E Operating Manual page 67

To cancel the operation
Touch [CANCEL] on the LCD screen on
your camcorder.
• You cannot cancel the operation after
[Finalizing DVD.] is displayed on the LCD
screen of your camcorder.
• Do not disconnect the i.LINK cable or set the
POWER switch to another mode on your
camcorder until the picture is completely copied
to the computer.
• When [CONVERTING] or [WRITING] is
displayed on the screen, capturing of pictures
has already finished. Even if you disconnect the
i.LINK cable or turn off the camcorder at this
stage, DVD creation will continue on your
computer.
• If any of the following occurs, copying of the
picture is canceled. A DVD containing the data
up to the point the operation was canceled is
created. Refer to the help files of "Click to
DVD" for details.
– The tape contains a 10-second blank portion.
– The tape data contains a date before the date
of later images.
– Both normal and wide pictures are recorded
on the same tape (Only for "Click to DVD"
older than Ver.2.2).
• You cannot operate [BURN DVD] in the
following situations:
– While a tape is running.
– When "Click to DVD" is started up from the
computer.
67