Obelisk Top2 Memory Card - Theben TR 644 top2 Installation And Operating Instructions Manual

OBELISK top2 memory card

Use memory card (see fig.)
 Insert memory card in the time switch.
 Read / read out saved switching times and
device settings in the time switch or start
Obelisk program.
 Remove memory card
OBELISK top2
(No. 907 0 404) after
copying and store in
the cover.
 Avoid mechanical stress or dirtying with other
storage/transport methods.
34
Copy OBELISK  Time switch
This copies the switching program (all standard
and special programs) and optionally all time
switch (e.g. Position, offset, external input,
time format etc..) from the memory card in the
time switch.
Copy TIME SWITCH  OBELISK
This copies all switching programs and settings
from the time switch to the memory card
OBELISK
COPY OBELISK
-> TIME SWITCH
COPY TIME

SWITCH ->
OBELISK
START
OBELISK
PROGRAM
OBELISK
INFO
END
ok
 TRANSCRIBE
OK