Playing The Image On A Tv - Sony Handycam 3-876-055-11(1) Operating Manual

Playing the image on a TV

Connection methods and quality of the
image (HD (high definition)/SD (standard
definition)) viewed on the TV screen
differ depending on what type of TV is
connected, and the connectors used.
Use the supplied AC Adaptor as the power
source (p. 15).
Refer also to the instruction manuals
supplied with the device to be connected.

Notes
When recording, set [X.V.COLOR] to [ON] to

play back on an x.v.Color-compliant TV (p. 64).
Some settings may need to be adjusted on
the TV when playing back. Refer to the
instruction manual of your TV for details.
Operation flow
You can connect your camcorder to the TV
easily following the instructions displayed
on the LCD screen, [TV CONNECT
Guide].
Switch the input on the TV to the
connected jack.
Refer to the instruction manuals of the
TV.

Connect your camcorder and TV
referring to [TV CONNECT Guide].

Make the required output settings
on your camcorder (p. 38).
6
A/V Remote
Connector

Notes
Your camcorder and the Handycam Station

are equipped with A/V Remote Connector or
A/V OUT jack (p. 106, 107). Connect the A/V
connecting cable or component A/V cable
either to the Handycam Station or to your
camcorder. If you connect A/V connecting
cables or component A/V cables to both the
Handycam Station and your camcorder at the
same time, image disturbance may occur.