Operation; Shooting; Basic Shooting Procedure; Adjusting The Black Balance - Sony ExwaveHAD DXC-990 Instructions For Use Manual

Operation

B

Shooting

Basic Shooting Procedure

3
1
Turn on the power of the camera and
all connected devices.
2
Illuminate an object with proper
lighting.
3
Aim the camera to the object and
adjust the iris, focus and zoom.
4
Adjust the white balance.
For details, see "Adjusting the White
Balance" on page 24.
5
Adjust the settings as required.
For details, see "Adjusting and Setting
with Menus" on page 9.
6
Start shooting.

Adjusting the Black Balance

Adjust the black balance first, after turning
on the power of your camera.
2
1
2
4, 5
3
Black balance adjustment errors
If the black balance adjustment is not
successful, the message "BLACK: NG"
appears on the screen. If this happens, take
the necessary measures and perform steps 1
through 3 again.
For details, see "List of Messages" on page
38.
1 3 2
MENU BLACK
TRIG IN
FILE
SELECT
RGB/SYNC
If any menu is displayed on the screen,
press the MENU button to remove it.
If a color bar signal is displayed on the
screen, press the BARS button to
remove it.
Press the BLACK button.
The lens iris control is automatically
closed, and the black balance is adjusted.
If you use a manual-iris lens, close the
iris then press the BLACK button.
While adjusting, the bars are displayed.
When the adjustment is completed, the
message "BLACK: OK" appears on the
screen.
BARS
WHITE
ENTER
23 GB
Shooting