Sony DVD608 Operating Manual page 23

BATT (battery)
release lever
Notes
• When you remove the battery pack or the AC
Adaptor, make sure that the
(Still) lamp (p. 25) is turned off.
When storing the battery pack
Fully discharge the battery before storing it
for an extended period.
To use an outside power source
Make the same connections as you do when
charging the battery pack. The battery pack
will not lose its charge in this case.
To check the remaining battery
(Battery Info)
Set the POWER switch to OFF (CHG), then
press DISP/BATT INFO.
After a while, the approximate recordable
time and battery information appear for
about 7 seconds. You can view the battery
information for up to 20 seconds by
pressing DISP/BATT INFO again while the
information is displayed.
Charging time
Approximate time (min.) required when
(Movie) lamp/
you fully charge a fully discharged battery
pack.
Battery pack
NP-FH40
(supplied)
NP-FH50
NP-FH70
NP-FH100
Recording time
Approximate time (min.) available when
you use a fully charged battery pack.
DCR-DVD108/DVD608
Battery pack
NP-FH40
(supplied)
NP-FH50
NP-FH70
NP-FH100
Remaining battery (approx.)
Recording capacity (approx.)
Continuous
recording
time
95
100
110
120
235
255
545
590
Charging time
125
135
170
390
Typical
recording
time*
45
50
50
55
110
120
260
285
23
Continued ,