Table of Contents
Advertisement
The following example shows settings for the DSR-
570WS/570WSP. The settings are somewhat different
from those for the DSR-390/390P.
Move the POWER switch to
the ON position with the
MENU dial held down.
Advanced
menu page 1
Align the cursor to
Confirmation
"ALL RESET" and
screen
press the MENU dial.
Press the MENU dial
(to cancel resetting).
a) Set the cursor to the page number (blinking) and turn the MENU
dial.
b) Set the cursor to EXIT MENU and press the MENU dial.
c) This page is not displayed for the DSR-390/390P. Therefore,
pages 10 to 15 are moved forward, becoming pages 9 to 14.
Note
After page 1 of the advanced menu, some pages and items may
not be displayed, depending on the connected accessories
(remote control devices), type of input signal, switch settings,
and so on.
Turn the MENU dial.
Turn the MENU dial
(to cancel resetting).
Turn the MENU dial.
Turn the MENU dial.
a)
a)
Turn the
a)
MENU dial.
Turn the
a)
MENU dial.
Chapter 4 Viewfinder Screen Indications and Menus
Normal indications
Advanced menu
page 2
Press the
MENU dial.
b)
Advanced menu
page 3
Press the
MENU dial.
b)
Advanced menu
c)
page 9
Press the
MENU dial.
b)
99
Advertisement
Table of Contents
